Nylon Membrane

highefficiencypleated-full
DOWNLOAD A CUT SHEET
  • Nova Filtration Nylon 6,6 cartridges offer a wide array of micron ratings from .03 to 20 microns
  • All Nylon 6,6 are produced in the USA on the most modern equipment available
  • Complete in-house testing guarantees a superior and consistent product
  • We offer all end cap configurations to offer you the proper cartridge to fit your applications and housing
  • All Nylon 6,6 membrane elements are internally supported offering strength to prevent media failure
  • Cartridges have excellent dirt holding capacity with low flow resistance
  • Cartridges are compliant with the FDA Title 21 for food and potable water contact
  •  End caps are thermally welded with no additives
  • Cartridges are constructed in a clean room environment
  • Naturally hydrophilic media does not need to be wetted before use
  • Cartridges may be ordered as final rinsed with 18 mega ohm water

 

 

Toxicity Purity
Nova Filtration Cartridges are manufactured with no additives or other manufacturing agents. We guarantee all materials used in the production meet FDA Title 21 of the Code of Federal Regulations 174.5 and 177.1520. Cartridges are Free of Surfactants, Resins, Binders and Adhesives
Sterilization
Multiple Autoclaving for 30 Minutes at 250°F (121°C) under no End Load Conditions. In-line Steam Sterilization is not recommended. May be In-line Sanitized with Hot Water at 180°F (82°C) for 1 hour.

 

PRODUCT SPECIFICATIONS

Product Specifications
Retention Ratings .03, .1, .2, .45, .65, .8, 1.2, 5, 10 & 20 micron
Membrane Nylon 6,6
Support Media Polypropylene
End Caps Polypropylene
Center Core Polypropylene
Outer Support Cage Polypropylene
Maximum Operating Temperature 175°F
Nominal Diameter O.D. – 2.7″
I.D. – 1″ center
Lengths 10, 20, 30, & 40 inch
Maximum Differential Pressure 45 psid