Meltblown Cartridges

Melt Blown Filter Elements

meltblown-full
DOWNLOAD A CUT SHEET

Features

  • Three layers structure cartridge offers high dirt holding capacity, longer service life.
  • Formed by thermal bond without using any binders and adhesives.
  • 100% Pure Polypropylene will not cause any pollution to water
  • Wide Chemical compatibility
  • Groove design to extend the filtration surface area.
  • All kinds of adaptors are available.

Applications

  • Drinking Water Treatment
  • Electronic
  • Industrial Water Treatment
  • Plating
  • Chemicals, solvents
  • Food and Beverage

Product Specifications

Micron Ratings: 1, 3 ,5 ,10 ,20 ,25 ,30 ,50 ,75 & 100 micron
Construction: Polypropylene or Nylon
Optional Core & End Caps Polypropylene
Maximum Operating Temperature: 155°F for Polypropylene
Diameter: O.D. – 2.5″ to 4.5″
I.D. – 1” center
Nominal Lengths: 9.75″ to 50″
Maximum Differential Pressure: 35 psid with a core
20 psid without a core

FDA compliance under Title 21 of the code of federal regulations for food contact applications

Available End Caps: 222, 226, Flat Gasket, Spring, Fin

Build a Part

Meltblown Micron Cartridge Diameter Cartridge Length Element Grade Heavy Duty Core (optional) End Cap Gasket / O-RING
NMB 1 A 20 C 2 B
NMB 1
3
5
10
20
25
30
50
75
100
A = 2.5″ Standard
BB = 4.5″ *
C = Custom
9.75 = 9.75
10 = 10
19.5 = 19.5
20 = 20
29.25 = 29.25
30 = 30
39 = 39
40 = 40
50 = 50
C = Custom
Blank = Standard
A = Absolute
C = Core 1 = DOE/no caps
2 = 222/Fin
3 = 222/Spring
4 = 222/Flat
5 = 226/Flat
6 = 226/Fin
7 = 226/Spring
8 = SOE/Spring
9 = Flat Gasket
A = Custom
B = Buna
V = Viton®
T = Teflon®
S = Silicone
N = Neoprene
D = EPDM (No selection required for DOE)

* 4.5″ diameter, only DOE is available